Maxx Model Products

Maxx Model CNC Aluminum Hop-Up Chamber for VFC SCAR Airsoft AEGs [SV]

Sold out
  • Maxx Model CNC Aluminum Hop-Up Chamber for VFC SCAR Airsoft AEGs [SV]
Maxx Model CNC Aluminum Hop-Up Chamber for VFC SCAR Airsoft AEGs [SV] Maxx Model CNC Aluminum Hop-Up Chamber for VFC SCAR Airsoft AEGs [SV]

Maxx Model Products

Maxx Model CNC Aluminum Hop-Up Chamber for VFC SCAR Airsoft AEGs [SV]

Sold out

Click Above to Buy

Description

Features

  • Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
  • Improved accuracy and ensure consistent air seal for VFC SCAR-L/H AEG series
  • Precision rotary dial design for fine hop-up adjustments
  • Re-engineered the hop-up levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
  • Removable Brass Threaded Slot Pin for setup and maintenance
  • Accepted the nozzle length from 21.00mm to 21.25mm on VFC SCAR-L and 38.50mm to 38.75mm on VFC SCAR-H
  • Fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
  • Extended sliding arms design on both side of the chamber housing to ensure the hop-up unit is always centered, straight and air tight at all times when closing the receivers
CNC Aluminum Hop-up Chamber SV unit is specially designed to improve accuracy, durability and ensure consistent air seal for VFC SCAR-L/H AEG series.
The Hop-up Chamber SV unit has a precision rotary dial design for fine hop-up adjustments, also re-engineered the hop-up levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hop-up Chamber SV unit is designed to accept the nozzle length from 21.00mm to 21.25mm on VFC SCAR-L and 38.50mm to 38.75mm on VFC SCAR-H, and also fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hop-up Chamber SV Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting. With the new extended sliding arms design on both side of the chamber housing, the hop-up unit is always centered, straight and air tight at all times when closing the receivers.

***The Dual UV LED Boards and Module set are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

Hop-Up Kit Includes:
  • 1 x CNC Aluminum Hop-up Chamber SV unit
  • 2 x Strong Clear Vinyl Cover set
  • 1 x CNC Aluminum Standard-Hop Arm
  • 1 x CNC Aluminum R-Hop Arm
  • 1 x Silicone Rubber Standard-Hop Nub Damper
  • 1 x Silicone Rubber R-Hop Nub Damper
  • 1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
  • 1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
  • 1 x CNC Brass Threaded Slot Pin
  • 1 x CNC Delrin Locking C-Clip
  • 1 x CNC Barrel Brass Spacer
  • 1 x Brass Spacer Holder O-ring
  • 1 x Steel Compression Spring

    • Specifications

    • Overall Length: 48.35mm
    • Overall Height: 27mm
    • Hub Outer Diameter (to fit into Outer Barrel): min 12mm
    • Hub Inner Diameter (to fit Nozzle): max 8.3mm
    • Application: Compatible with VFC SCAR-L and SCAR-H Airsoft AEGs
    • Material: Aluminum 6061
    • Type: One Piece