Maxx Model Products

Maxx Model CNC Aluminum Hopup Chamber M4A - PRO - AEG

$104.99
  • Maxx Model CNC Aluminum Hopup Chamber M4A - PRO - AEG

Maxx Model Products

Maxx Model CNC Aluminum Hopup Chamber M4A - PRO - AEG

$104.99

Click Above to Buy

Description

Features

  • Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
  • Performed accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series
  • Precision Rotary Dial Knob for fine hopup adjustments
  • Re-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
  • Removable Steel Pivot Pin for ease of setup and maintenance
  • Accepted 21.00mm to 21.25mm nozzle length
  • Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
  • Equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately)
  • Mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots
  • Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting
  • Equipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use
  • Specially designed with a new BB Latching System to prevent BB dropping after removing the magazine
  • The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber
  • Compatible with any 11mm inner bore AEG Gearbox/HPA Engine nozzle outlets
  • The Dual UV LED Tracer Module to glow BB in the dark ready!

Includes

  • 1 x CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit
  • 2 x CNC Acrylic Side Cover
  • 2 x CNC Brass 2.5mm Side Wing
  • 1 x CNC Steel Pivot Pin
  • 1 x CNC Aluminum Hopup Lever
  • 1 x CNC Aluminum Soft Round Nub
  • 1 x CNC Aluminum Soft Flat Nub (4mm)
  • 1 x CNC Aluminum Hard Concave Nub (4mm)
  • 3 x Steel Nub Spring
  • 1 x CNC Steel Spring Guide
  • 1 x Steel Upper Compression Spring
  • 1 x Steel Center Compression Spring
  • 1 x CNC Delrin Locking C-Clip
  • 1 x CNC Brass Barrel Spacer
  • 1 x Brass Barrel Spacer Holder O-ring
  • 1 x CNC Aluminum Rotary Dial Knob
  • 1 x CNC Aluminum Inlet Adaptor (OD11mm)
  • 1 x CNC Brass Inlet Spacer 

Specifications

  • Overall Length: 51.65mm
  • Overall Height: 37.75mm
  • Inlet Adaptor Outer Diameter (to fit into Gear Box): 11mm
  • Hub Outer Diameter (to fit into Outer Barrel): 12mm
  • Hub Inner Diameter (to fit Nozzle): 8mm
  • Feeder Outer Diameter (to fit magazine): 8.85mm
  • Feeder Length (to fit magazine): 6mm
  • Material: Aluminum 6061